usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=1004, idProduct=613a
usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
usb 2-1.1: Product: FOMA L05A
usb 2-1.1: Manufacturer: LG Electronics Inc.
usb 2-1.1: SerialNumber: 352360039211984
usb 2-1.1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 6:0:0:0: CD-ROM LGE CD-ROM 1.00 PQ: 0 ANSI: 2
scsi 6:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 001 Device 011: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Bus 002 Device 003: ID 1004:613a LG Electronics, Inc.
$ sudo eject /dev/sr0
usb 2-1.1: USB disconnect, device number 3
usb 2-1.1: new high speed USB device number 4 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=1004, idProduct=6124
usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-1.1: Product: FOMA L05A
usb 2-1.1: Manufacturer: LG Electronics Inc.
usb 2-1.1: configuration #1 chosen from 1 choice
cdc_acm 2-1.1:1.0: ttyACM0: USB ACM device
cdc_acm 2-1.1:1.2: ttyACM1: USB ACM device
cdc_acm 2-1.1:1.4: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
tty_port_close_start: tty->count = 1 port count = 0.
tty_port_close_start: tty->count = 1 port count = 0.
tty_port_close_start: tty->count = 1 port count = 0.
tty_port_close_start: tty->count = 1 port count = 0.
tty_port_close_start: tty->count = 1 port count = 0.
tty_port_close_start: tty->count = 1 port count = 0.
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 001 Device 011: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Bus 002 Device 004: ID 1004:6124 LG Electronics, Inc.
$ cat /etc/wvdial.conf
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Modem Type = USB Modem
Phone = *99***3#
ISDN = 0
Username = ''
Init1 = ATZ
Password = ''
Modem = /dev/ttyACM0
Baud = 7200000
Stupid Mode = yes
Carrier Check = no
$ sudo /usr/bin/wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
--> Modem initialized.
--> Sending: ATDT*99***3#
--> Waiting for carrier.
ATDT*99***3#
CONNECT 7200000
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Thu Jun 12 13:54:54 2014
--> Pid of pppd: 8037
--> Using interface ppp0
--> local IP address 1.67.30.184
--> remote IP address 10.64.64.64
--> primary DNS address 220.159.212.200
--> secondary DNS address 220.159.212.201
^CCaught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> Connect time 1.0 minutes.
--> Disconnecting at Thu Jun 12 13:55:55 2014
